Inconel 600

Alloy Category: Corrosion-resistant alloy Base Material Shape: Wire (round/flat wire) Alloy Series: Nickel-chromium-iron alloy Execution Standard: ASTM Certification: ISO9001:2015

Category：

In conel series

Keywords：High resistance electric heating alloy | Corrosion-resistant alloy | Thermal spraying materials

Message

Inconel 600

Product Introduction

Cold Working

Alloys can be strengthened through cold working and can be joined by resistance welding, fusion welding, or brazing. They are suitable for making oxidation-resistant parts that withstand low loads below 1100℃.

Brazing

Low Load

Oxidation Resistant

Application Areas

● Thermocouple sheaths in corrosive atmospheres

● Vinyl chloride monomer production: resistance to chlorine, hydrogen chloride, oxidation, and carbonization corrosion

● Uranium oxide conversion to hexafluoride: resistance to hydrogen fluoride corrosion

● Production and use areas of corrosive alkali metals, especially in environments using sulfides

● Production of titanium dioxide using the chlorine method

● Production of organic or inorganic chlorides and fluorides: resistance to chlorine and fluorine corrosion

● Nuclear reactors

● Flasks and components in heat treatment furnaces, especially in carburizing and nitriding atmospheres

● Alloy 600H is recommended for use in catalytic regenerators in petrochemical production at temperatures above 700℃ for longer service life.

Chemical Composition

Alloy	%	Nickel	Chromium	Iron	Carbon	Manganese	Silicon	Copper
600	Minimum	72	14	6
	Maximum		17	10	0.15	1	0.5	0.5

Physical Properties

Density	8.4 g/cm³
Melting Point	1370-1425 ℃

Mechanical Properties

Alloy		Tensile Strength ob (Mpa)			Yield Strength σ0.2 (Mpa)		Elongation A5 %		Hardness HB
600		≥500			≥18c		≥35		≤185

none

Inconel 601